components:
  schemas:
    Sensor_v1_9_1_Actions:
      additionalProperties: false
      description: The available actions for this resource.
      properties:
        '#Sensor.ResetMetrics':
          $ref: '#/components/schemas/Sensor_v1_9_1_ResetMetrics'
        '#Sensor.ResetToDefaults':
          $ref: '#/components/schemas/Sensor_v1_9_1_ResetToDefaults'
        Oem:
          $ref: '#/components/schemas/Sensor_v1_9_1_OemActions'
          description: The available OEM-specific actions for this resource.
          x-longDescription: This property shall contain the available OEM-specific
            actions for this resource.
      type: object
      x-longDescription: This type shall contain the available actions for this resource.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_ImplementationType:
      enum:
      - PhysicalSensor
      - Synthesized
      - Reported
      type: string
      x-enumDescriptions:
        PhysicalSensor: The reading is acquired from a physical sensor.
        Reported: The reading is obtained from software or a device.
        Synthesized: The reading is obtained by applying a calculation on one or more
          properties or multiple sensors.  The calculation is not provided.
    Sensor_v1_9_1_Links:
      additionalProperties: false
      description: The links to other resources that are related to this resource.
      properties:
        AssociatedControls:
          description: An array of links to the controls that can affect this sensor.
          items:
            $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_idRef
          readOnly: true
          type: array
          x-longDescription: This property shall contain an array of links to resources
            of type `Control` that represent the controls that can affect this sensor.
          x-versionAdded: v1_4_0
        AssociatedControls@odata.count:
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_count
        Oem:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Oem
          description: The OEM extension property.
          x-longDescription: This property shall contain the OEM extensions.  All
            values for properties contained in this object shall conform to the Redfish
            Specification-described requirements.
      type: object
      x-longDescription: This Redfish Specification-described type shall contain links
        to resources that are related to but are not contained by, or subordinate
        to, this resource.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_OemActions:
      additionalProperties: true
      description: The available OEM-specific actions for this resource.
      properties: {}
      type: object
      x-longDescription: This type shall contain the available OEM-specific actions
        for this resource.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_ReadingBasisType:
      enum:
      - Zero
      - Delta
      - Headroom
      type: string
      x-enumDescriptions:
        Delta: A reading that reports the difference between two measurements.
        Headroom: A reading that decreases as it approaches a defined reference point.
        Zero: A zero-based reading.
      x-enumLongDescriptions:
        Delta: This value shall indicate a reading that reports the difference between
          two measurements.
        Headroom: This value shall indicate a reading that decreases in value as it
          approaches the reference point.  If the value crosses the reference point,
          the value may be reported as a negative number or may report a value of
          zero.
        Zero: This value shall indicate a reading with zero as its reference point.
    Sensor_v1_9_1_ReadingType:
      enum:
      - Temperature
      - Humidity
      - Power
      - EnergykWh
      - EnergyJoules
      - EnergyWh
      - ChargeAh
      - Voltage
      - Current
      - Frequency
      - Pressure
      - PressurekPa
      - PressurePa
      - LiquidLevel
      - Rotational
      - AirFlow
      - AirFlowCMM
      - LiquidFlow
      - LiquidFlowLPM
      - Barometric
      - Altitude
      - Percent
      - AbsoluteHumidity
      - Heat
      type: string
      x-enumDeprecated:
        AirFlow: This value has been deprecated in favor of `AirFlowCMM` for consistent
          use of SI units.
        LiquidFlow: This value has been deprecated in favor of `LiquidFlowLPM` for
          consistency of units typically expected or reported by `Sensor` and `Control`
          resources.
        Pressure: This value has been deprecated in favor of `PressurePa` or `PressurekPa`
          for consistency of units between `Sensor` and `Control` resources.
      x-enumDescriptions:
        AbsoluteHumidity: Absolute humidity (g/m^3).
        AirFlow: Air flow (cu ft/min).
        AirFlowCMM: Air flow (m^3/min).
        Altitude: Altitude (m).
        Barometric: Barometric pressure (mm).
        ChargeAh: Charge (Ah).
        Current: Current (A).
        EnergyJoules: Energy (J).
        EnergyWh: Energy (Wh).
        EnergykWh: Energy (kWh).
        Frequency: Frequency (Hz).
        Heat: Heat (kW).
        Humidity: Relative humidity (percent).
        LiquidFlow: Liquid flow (L/s).
        LiquidFlowLPM: Liquid flow (L/min).
        LiquidLevel: Liquid level (cm).
        Percent: Percent (%).
        Power: Power (W).
        Pressure: Pressure (Pa).
        PressurePa: Pressure (Pa).
        PressurekPa: Pressure (kPa).
        Rotational: Rotational (RPM).
        Temperature: Temperature (C).
        Voltage: Voltage (VAC or VDC).
      x-enumLongDescriptions:
        AbsoluteHumidity: This value shall indicate an absolute (volumetric) humidity
          measurement, in grams per cubic meter units.  The `ReadingUnits` property
          shall contain `g/m3`.
        AirFlow: This value shall indicate a measurement of a volume of gas per unit
          of time, in cubic feet per minute units, that flows through a particular
          junction.  The `ReadingUnits` property shall contain `[ft_i]3/min`.
        AirFlowCMM: This value shall indicate a measurement of a volume of gas per
          unit of time, in cubic meters per minute units, that flows through a particular
          junction.  The `ReadingUnits` property shall contain `m3/min`.
        Altitude: This value shall indicate a measurement of altitude, in meter units,
          defined as the elevation above sea level.  The `ReadingUnits` property shall
          contain `m`.
        Barometric: This value shall indicate a measurement of barometric pressure,
          in millimeters of a mercury column.  The `ReadingUnits` property shall contain
          `mm[Hg]`.
        ChargeAh: This value shall indicate the amount of charge, integral of current
          over time, of the monitored item.  If representing metered charge consumption
          the value shall reflect the charge consumption since the sensor metrics
          were last reset.  The value of the `Reading` property shall be in ampere-hour
          units and the `ReadingUnits` property shall contain `A.h`.
        Current: This value shall indicate a measurement of the root mean square (RMS)
          of instantaneous current calculated over an integer number of line cycles
          for a circuit.  Current is expressed in ampere units and the `ReadingUnits`
          property shall contain `A`.
        EnergyJoules: This value shall indicate the energy, integral of real power
          over time, of the monitored item.  If representing metered power consumption
          the value shall reflect the power consumption since the sensor metrics were
          last reset.  The value of the `Reading` property shall be in joule units
          and the `ReadingUnits` property shall contain `J`.  This value is used for
          device-level energy consumption measurements, while `EnergykWh` is used
          for large-scale consumption measurements.
        EnergyWh: This value shall indicate the energy, integral of real power over
          time, of the monitored item.  If representing metered power consumption
          the value shall reflect the power consumption since the sensor metrics were
          last reset.  The value of the `Reading` property shall be in watt-hour units
          and the `ReadingUnits` property shall contain `W.h`.  This value is used
          for device-level energy consumption measurements, while `EnergykWh` is used
          for large-scale consumption measurements.
        EnergykWh: This value shall indicate the energy, integral of real power over
          time, of the monitored item.  If representing metered power consumption
          the value shall reflect the power consumption since the sensor metrics were
          last reset.  The value of the `Reading` property shall be in kilowatt-hour
          units and the `ReadingUnits` property shall contain `kW.h`.  This value
          is used for large-scale energy consumption measurements, while `EnergyJoules`
          and `EnergyWh` are used for device-level consumption measurements.
        Frequency: This value shall indicate a frequency measurement, in hertz units.  The
          `ReadingUnits` property shall contain `Hz`.
        Heat: This value shall indicate a heat measurement, in kilowatt units.  The
          `ReadingUnits` property shall contain `kW`.
        Humidity: This value shall indicate a relative humidity measurement, in percent
          units.  The `ReadingUnits` property shall contain `%`.
        LiquidFlow: This value shall indicate a measurement of a volume of liquid
          per unit of time, in liters per second units, that flows through a particular
          junction.  The `ReadingUnits` property shall contain `L/s`.
        LiquidFlowLPM: This value shall indicate a measurement of a volume of liquid
          per unit of time, in liters per minute units, that flows through a particular
          junction.  The `ReadingUnits` property shall contain `L/min`.
        LiquidLevel: This value shall indicate a measurement of fluid height, in centimeter
          units, relative to a specified vertical datum and the `ReadingUnits` property
          shall contain `cm`.
        Percent: This value shall indicate a percentage measurement, in percent units.  The
          `Reading` value, while typically `0` to `100`, may exceed `100` for rate-of-change
          or similar readings.  The `ReadingUnits` property shall contain `%`.
        Power: This value shall indicate the arithmetic mean of product terms of instantaneous
          voltage and current values measured over integer number of line cycles for
          a circuit, in watt units.  The `ReadingUnits` property shall contain `W`.
        Pressure: This value shall indicate a measurement of force, in pascal units,
          applied perpendicular to the surface of an object per unit area over which
          that force is distributed.  The `ReadingUnits` property shall contain `Pa`.
        PressurePa: This value shall indicate a measurement of pressure, in pascal
          units, relative to atmospheric pressure.  The `ReadingUnits` property shall
          contain `Pa`.
        PressurekPa: This value shall indicate a measurement of pressure, in kilopascal
          units, relative to atmospheric pressure.  The `ReadingUnits` property shall
          contain `kPa`.
        Rotational: This value shall indicate a measurement of rotational frequency,
          in revolutions per minute units.  The `ReadingUnits` property shall contain
          either `{rev}/min`, which is preferred, or `RPM`, which is a deprecated
          value.
        Temperature: This value shall indicate a temperature measurement, in degree
          Celsius units.  The `ReadingUnits` property shall contain `Cel`.
        Voltage: This value shall indicate a measurement of the root mean square (RMS)
          of instantaneous voltage calculated over an integer number of line cycles
          for a circuit.  Voltage is expressed in volt units and the `ReadingUnits`
          property shall contain `V`.
      x-enumVersionAdded:
        AbsoluteHumidity: v1_5_0
        AirFlowCMM: v1_7_0
        ChargeAh: v1_4_0
        EnergyWh: v1_4_0
        Heat: v1_7_0
        LiquidFlowLPM: v1_7_0
        Percent: v1_1_0
        PressurePa: v1_7_0
        PressurekPa: v1_5_0
      x-enumVersionDeprecated:
        AirFlow: v1_7_0
        LiquidFlow: v1_7_0
        Pressure: v1_7_0
    Sensor_v1_9_1_ResetMetrics:
      additionalProperties: false
      description: Resets metrics related to this sensor.
      properties:
        target:
          description: Link to invoke action
          format: uri-reference
          type: string
        title:
          description: Friendly action name
          type: string
      type: object
      x-longDescription: This action shall reset any time intervals or counted values
        for this sensor.  The `SensorResetTime` property shall be updated to reflect
        the time that this action was performed.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_ResetMetricsRequestBody:
      additionalProperties: false
      description: Resets metrics related to this sensor.
      properties: {}
      type: object
      x-longDescription: This action shall reset any time intervals or counted values
        for this sensor.  The `SensorResetTime` property shall be updated to reflect
        the time that this action was performed.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_ResetToDefaults:
      additionalProperties: false
      description: The action resets the values of writable properties to factory
        defaults.
      properties:
        target:
          description: Link to invoke action
          format: uri-reference
          type: string
        title:
          description: Friendly action name
          type: string
      type: object
      x-longDescription: This action shall reset the values of writable properties
        in this resource to their default values as specified by the manufacturer.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
      x-versionAdded: v1_6_0
    Sensor_v1_9_1_ResetToDefaultsRequestBody:
      additionalProperties: false
      description: The action resets the values of writable properties to factory
        defaults.
      properties: {}
      type: object
      x-longDescription: This action shall reset the values of writable properties
        in this resource to their default values as specified by the manufacturer.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_Sensor:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        '@odata.context':
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_context
        '@odata.etag':
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_etag
        '@odata.id':
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_id
        '@odata.type':
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_type
        Accuracy:
          deprecated: true
          description: The estimated percent error of measured versus actual values.
          nullable: true
          readOnly: true
          type: number
          x-deprecatedReason: This property has been deprecated in favor of ReadingAccuracy.
          x-longDescription: This property shall contain the percent error +/- of
            the measured versus actual values of the `Reading` property.
          x-units: '%'
          x-versionDeprecated: v1_8_0
        Actions:
          $ref: '#/components/schemas/Sensor_v1_9_1_Actions'
          description: The available actions for this resource.
          x-longDescription: This property shall contain the available actions for
            this resource.
        AdjustedMaxAllowableOperatingValue:
          description: The adjusted maximum allowable operating value for this equipment
            based on the environmental conditions.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the adjusted maximum allowable
            operating value for the equipment that this sensor monitors, as specified
            by a standards body, manufacturer, or both.  The value is adjusted based
            on environmental conditions.  For example, liquid inlet temperature can
            be adjusted based on the available liquid pressure.
        AdjustedMinAllowableOperatingValue:
          description: The adjusted minimum allowable operating value for this equipment
            based on the environmental conditions.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the adjusted minimum allowable
            operating value for the equipment that this sensor monitors, as specified
            by a standards body, manufacturer, or both.  This value is adjusted based
            on environmental conditions.  For example, liquid inlet temperature can
            be adjusted based on the available liquid pressure.
        ApparentVA:
          description: The product of voltage and current for an AC circuit, in volt-ampere
            units.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall contain the product of voltage (RMS)
            multiplied by current (RMS) for a circuit.  This property can appear in
            sensors of the `Power` `ReadingType`, and shall not appear in sensors
            of other `ReadingType` values.
          x-units: V.A
        ApparentkVAh:
          description: Apparent energy (kVAh).
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorEnergykWh
          x-longDescription: This property shall contain the apparent energy, in kilovolt-ampere-hour
            units, for an electrical energy measurement.  This property can appear
            in sensors with a `ReadingType` containing `EnergykWh`, and shall not
            appear in sensors with other `ReadingType` values.
          x-units: kV.A.h
          x-versionAdded: v1_5_0
        AverageReading:
          description: The average sensor value.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the average sensor value
            over the time specified by the value of the `AveragingInterval` property.  The
            value shall be reset by the `ResetMetrics` action or by a service reset
            of time-based property values.
          x-versionAdded: v1_4_0
        AveragingInterval:
          description: The interval over which the average sensor value is calculated.
          nullable: true
          pattern: ^P(\d+D)?(T(\d+H)?(\d+M)?(\d+(.\d+)?S)?)?$
          readOnly: false
          type: string
          x-longDescription: This property shall contain the interval over which the
            sensor value is averaged to produce the value of the `AverageReading`
            property.  This property shall only be present if the `AverageReading`
            property is present.
          x-versionAdded: v1_4_0
        AveragingIntervalAchieved:
          description: Indicates that enough readings were collected to calculate
            the average sensor reading over the averaging interval time.
          nullable: true
          readOnly: true
          type: boolean
          x-longDescription: This property shall indicate that enough readings were
            collected to calculate the `AverageReading` value over the interval specified
            by the `AveragingInterval` property.  The value shall be reset by the
            `ResetMetrics` action.  This property shall only be present if the `AveragingInterval`
            property is present.
          x-versionAdded: v1_4_0
        Calibration:
          description: The calibration offset applied to the Reading.
          nullable: true
          readOnly: false
          type: number
          x-longDescription: This property shall contain the offset applied to the
            raw sensor value to provide a calibrated value for the sensor as returned
            by the `Reading` property.  The value of this property shall follow the
            units of the `Reading` property for this sensor instance.  Updating the
            value of this property shall not affect the value of the `CalibrationTime`
            property.
          x-versionAdded: v1_4_0
        CalibrationTime:
          description: The date and time that the sensor was last calibrated.
          format: date-time
          nullable: true
          readOnly: false
          type: string
          x-longDescription: This property shall contain the date and time that the
            sensor was last calibrated.  This property is intended to reflect the
            actual time the calibration occurred.
          x-versionAdded: v1_4_0
        CrestFactor:
          description: The crest factor for this sensor.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorCurrent,SensorVoltage
          x-longDescription: This property shall contain the ratio of the peak measurement
            divided by the RMS measurement and calculated over same N line cycles.  A
            sine wave would have a value of 1.414.
          x-versionAdded: v1_1_0
        Description:
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Description
          - enum:
            - null
          readOnly: true
        ElectricalContext:
          description: The combination of current-carrying conductors.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/Sensor.yaml#/components/schemas/Sensor_ElectricalContext
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall represent the combination of current-carrying
            conductors that distribute power.
        Id:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Id
          readOnly: true
        Implementation:
          description: The implementation of the sensor.
          oneOf:
          - $ref: '#/components/schemas/Sensor_v1_9_1_ImplementationType'
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall contain the implementation of the
            sensor.
          x-versionAdded: v1_1_0
        LifetimeReading:
          description: The total accumulation value for this sensor.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorEnergykWh
          x-longDescription: This property shall contain the total accumulation of
            the `Reading` property over the sensor's lifetime.  This value shall not
            be reset by the `ResetMetrics` action.
          x-versionAdded: v1_1_0
        LifetimeStartDateTime:
          description: The date and time when the sensor started accumulating readings
            for the `LifetimeReading` property.
          format: date-time
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the date and time when the
            sensor started accumulating readings for the `LifetimeReading` property.  This
            might contain the same value as the production date of the device that
            contains this sensor.
          x-versionAdded: v1_9_0
        Links:
          $ref: '#/components/schemas/Sensor_v1_9_1_Links'
          description: The links to other resources that are related to this resource.
          x-longDescription: This property shall contain links to resources that are
            related to but are not contained by, or subordinate to, this resource.
          x-versionAdded: v1_3_0
        LoadPercent:
          deprecated: true
          description: The power load utilization for this sensor.
          nullable: true
          readOnly: true
          type: number
          x-deprecatedReason: This property has been deprecated in favor of using
            a sensor instance with a `ReadingType` of `Percent` to show utilization
            values when needed.
          x-longDescription: This property shall indicate the power load utilization
            percent for this sensor.  This property can appear in sensors of the `Power`
            `ReadingType`, and shall not appear in sensors of other `ReadingType`
            values.
          x-units: '%'
          x-versionDeprecated: v1_1_0
        Location:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Location
          description: The location information for this sensor.
          x-longDescription: This property shall indicate the location information
            for this sensor.
        LowestReading:
          description: The lowest sensor value.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the lowest sensor value since
            the last `ResetMetrics` action was performed or since the service last
            reset the time-based property values.
          x-versionAdded: v1_4_0
        LowestReadingTime:
          description: The time when the lowest sensor value occurred.
          format: date-time
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the date and time when the
            lowest sensor value was observed, as reported as the value of `LowestReading`.
          x-versionAdded: v1_4_0
        Manufacturer:
          description: The manufacturer of this sensor.
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the name of the organization
            responsible for producing the sensor.  This organization may be the entity
            from whom the sensor is purchased, but this is not necessarily true.  This
            property is generally used only for replaceable or user-configurable sensors.
          x-versionAdded: v1_9_0
        MaxAllowableOperatingValue:
          description: The maximum allowable operating value for this equipment.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the maximum allowable operating
            value for the equipment that this sensor monitors, as specified by a standards
            body, manufacturer, or both.
        MinAllowableOperatingValue:
          description: The minimum allowable operating value for this equipment.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the minimum allowable operating
            value for the equipment that this sensor monitors, as specified by a standards
            body, manufacturer, or both.
        Model:
          description: The model number of the sensor.
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the name by which the manufacturer
            generally refers to the sensor.  This property is generally used only
            for replaceable or user-configurable sensors.
          x-versionAdded: v1_9_0
        Name:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Name
          readOnly: true
        Oem:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Oem
          description: The OEM extension property.
          x-longDescription: This property shall contain the OEM extensions.  All
            values for properties that this object contains shall conform to the Redfish
            Specification-described requirements.
        PartNumber:
          description: The part number of the sensor.
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain a part number assigned by
            the organization that is responsible for producing or manufacturing the
            sensor.  This property is generally used only for replaceable or user-configurable
            sensors.
          x-versionAdded: v1_9_0
        PeakReading:
          description: The peak sensor value.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the peak sensor value since
            the last `ResetMetrics` action was performed or since the service last
            reset the time-based property values.
        PeakReadingTime:
          description: The time when the peak sensor value occurred.
          format: date-time
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the date and time when the
            peak sensor value was observed, as reported as the value of `PeakReading`.
        PhaseAngleDegrees:
          description: The phase angle (degrees) between the current and voltage waveforms.
          maximum: 90
          minimum: -90
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall contain the phase angle, in degree
            units, between the current and voltage waveforms for an electrical measurement.  This
            property can appear in sensors with a `ReadingType` containing `Power`,
            and shall not appear in sensors with other `ReadingType` values.
          x-versionAdded: v1_5_0
        PhysicalContext:
          description: The area or device to which this sensor measurement applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalContext
          - enum:
            - null
          readOnly: true
          x-excerpt: SensorArray,SensorFanArray,SensorPowerArray
          x-longDescription: This property shall contain a description of the affected
            component or region within the equipment to which this sensor measurement
            applies.
        PhysicalSubContext:
          description: The usage or location within a device to which this sensor
            measurement applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalSubContext
          - enum:
            - null
          readOnly: true
          x-excerpt: SensorArray,SensorFanArray,SensorPowerArray
          x-longDescription: This property shall contain a description of the usage
            or sub-region within the equipment to which this sensor measurement applies.  This
            property generally differentiates multiple sensors within the same `PhysicalContext`
            instance.
        PowerFactor:
          description: The power factor for this sensor.
          maximum: 1
          minimum: -1
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall identify the quotient of real power
            (W) and apparent power (VA) for a circuit.  `PowerFactor` is expressed
            in unit-less 1/100ths.  This property can appear in sensors containing
            a `ReadingType` value of `Power`, and shall not appear in sensors of other
            `ReadingType` values.
        Precision:
          description: The number of significant digits in the reading.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the number of significant
            digits in the `Reading` property.
        ReactiveVAR:
          description: The square root of the difference term of squared apparent
            VA and squared power (Reading) for a circuit, in VAR units.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall contain the arithmetic mean of product
            terms of instantaneous voltage and quadrature current measurements calculated
            over an integer number of line cycles for a circuit.  This property can
            appear in sensors of the `Power` `ReadingType`, and shall not appear in
            sensors of other `ReadingType` values.
          x-units: V.A
        ReactivekVARh:
          description: Reactive energy (kVARh).
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorEnergykWh
          x-longDescription: This property shall contain the reactive energy, in kilovolt-ampere-hours
            (reactive) units, for an electrical energy measurement.  This property
            can appear in sensors with a `ReadingType` containing `EnergykWh`, and
            shall not appear in sensors with other `ReadingType` values.
          x-units: kV.A.h
          x-versionAdded: v1_5_0
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
        ReadingAccuracy:
          description: Accuracy (+/-) of the reading.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall contain the accuracy of the value
            of the `Reading` property for this sensor.  The value shall be the absolute
            value of the maximum deviation of the `Reading` from its actual value.  The
            value shall be in units that follow the `ReadingUnits` for this sensor.
          x-versionAdded: v1_8_0
        ReadingBasis:
          description: The basis for the reading of this sensor.
          oneOf:
          - $ref: '#/components/schemas/Sensor_v1_9_1_ReadingBasisType'
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall indicate the basis or frame of reference
            for the value of the `Reading` property.  If this property is not present,
            the value shall be assumed to be `Zero`.
          x-versionAdded: v1_7_0
        ReadingRangeMax:
          description: The maximum possible value for this sensor.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall indicate the maximum possible value
            of the `Reading` property for this sensor.  This value is the range of
            valid readings for this sensor.  Values outside this range are discarded
            as reading errors.
        ReadingRangeMin:
          description: The minimum possible value for this sensor.
          nullable: true
          readOnly: true
          type: number
          x-longDescription: This property shall indicate the minimum possible value
            of the `Reading` property for this sensor.  This value is the range of
            valid readings for this sensor.  Values outside this range are discarded
            as reading errors.
        ReadingTime:
          description: The date and time that the reading was acquired from the sensor.
          format: date-time
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the date and time that the
            reading data was acquired from the sensor.  This value is used to synchronize
            readings from multiple sensors and does not represent the time at which
            the resource was accessed.
          x-versionAdded: v1_1_0
        ReadingType:
          description: The type of sensor.
          oneOf:
          - $ref: '#/components/schemas/Sensor_v1_9_1_ReadingType'
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall contain the type of the sensor.
        ReadingUnits:
          description: The units of the reading, thresholds, and other reading-related
            properties in UCUM c/s format.
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the units of the sensor's
            reading, thresholds, and other reading-related properties.  The value
            shall follow the case-sensitive symbol format defined by the Unified Code
            for Units of Measure (UCUM), as specified by the 'Units of measure annotation'
            clause of the Redfish Specification.
        RelatedItem:
          description: An array of links to resources or objects that this sensor
            services.
          items:
            $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_idRef
          readOnly: true
          type: array
          x-longDescription: This property shall contain an array of links to resources
            or objects that this sensor services.
          x-versionAdded: v1_2_0
        RelatedItem@odata.count:
          $ref: http://redfish.dmtf.org/schemas/v1/odata-v4.yaml#/components/schemas/odata-v4_count
        SKU:
          description: The SKU of the sensor.
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the stock-keeping unit number
            for this sensor.  This property is generally used only for replaceable
            or user-configurable sensors.
          x-versionAdded: v1_9_0
        SensingFrequency:
          deprecated: true
          description: The time interval between readings of the physical sensor.
          nullable: true
          readOnly: true
          type: number
          x-deprecatedReason: This property has been deprecated in favor of the `SensingInterval`
            property, which uses the duration time format for interoperability.
          x-longDescription: This property shall contain the time interval between
            readings of the physical sensor.
          x-versionDeprecated: v1_1_0
        SensingInterval:
          description: The time interval between readings of the sensor.
          nullable: true
          pattern: ^P(\d+D)?(T(\d+H)?(\d+M)?(\d+(.\d+)?S)?)?$
          readOnly: true
          type: string
          x-longDescription: This property shall contain the time interval between
            readings of data from the sensor.
          x-versionAdded: v1_1_0
        SensorGroup:
          $ref: http://redfish.dmtf.org/schemas/v1/Redundancy.yaml#/components/schemas/Redundancy_RedundantGroup
          description: The group of sensors that provide readings for this sensor.
          x-longDescription: This property shall contain information for a group of
            sensors that provide input for the value of this sensor's reading.  If
            this property is present, the `Implementation` property shall contain
            the value `Synthesized`.  The group may be created for redundancy or to
            improve the accuracy of the reading through multiple sensor inputs.
          x-versionAdded: v1_4_0
        SensorResetTime:
          description: The date and time when the time-based properties were last
            reset.
          format: date-time
          nullable: true
          readOnly: true
          type: string
          x-excerpt: SensorEnergykWh
          x-longDescription: This property shall contain the date and time when the
            `ResetMetrics` action was last performed or when the service last reset
            the time-based property values.
        SerialNumber:
          description: The serial number of the sensor.
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain a manufacturer-allocated
            number that identifies the sensor.  This property is generally used only
            for replaceable or user-configurable sensors.
          x-versionAdded: v1_9_0
        SparePartNumber:
          description: The spare part number of the sensor.
          nullable: true
          readOnly: true
          type: string
          x-longDescription: This property shall contain the spare part number of
            the sensor.  This property is generally used only for replaceable or user-configurable
            sensors.
          x-versionAdded: v1_9_0
        SpeedRPM:
          description: The rotational speed.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorFan,SensorFanArray,SensorPump
          x-longDescription: This property shall contain a reading of the rotational
            speed of the device in revolutions per minute (RPM) units.
          x-units: '{rev}/min'
          x-versionAdded: v1_2_0
        Status:
          $ref: http://redfish.dmtf.org/schemas/v1/Resource.yaml#/components/schemas/Resource_Status
          description: The status and health of the resource and its subordinate or
            dependent resources.
          x-longDescription: This property shall contain any status or health properties
            of the resource.
        THDPercent:
          description: The total harmonic distortion percent (% THD).
          minimum: 0
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorCurrent,SensorVoltage
          x-longDescription: This property shall contain the total harmonic distortion
            of the `Reading` property in percent units, typically `0` to `100`.
          x-units: '%'
          x-versionAdded: v1_1_0
        Thresholds:
          $ref: '#/components/schemas/Sensor_v1_9_1_Thresholds'
          description: The set of thresholds defined for this sensor.
          x-longDescription: This property shall contain the set of thresholds that
            derive a sensor's health and operational range.
        UserLabel:
          description: A user-assigned label.
          readOnly: false
          type: string
          x-longDescription: This property shall contain a user-assigned label used
            to identify this resource.  This property shall only be present if the
            sensor can be configured for different purposes, or is dependent on configuration
            or end-user settings.  This property shall not be present for embedded
            sensors with defined functions that cannot be altered.  If a value has
            not been assigned by a user, the value of this property shall be an empty
            string.
          x-versionAdded: v1_9_0
        VoltageType:
          description: The voltage type for this sensor.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/Sensor.yaml#/components/schemas/Sensor_VoltageType
          - enum:
            - null
          readOnly: true
          x-longDescription: This property shall represent the type of input voltage
            the sensor monitors.
      required:
      - '@odata.id'
      - '@odata.type'
      - Id
      - Name
      type: object
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorArrayExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        DeviceName:
          description: The name of the device.
          nullable: true
          readOnly: true
          type: string
          x-excerpt: SensorArray,SensorFanArray
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain the name of the device associated
            with this sensor.  If the device is represented by a resource, the value
            shall contain the value of the `Name` property of the associated resource.
          x-versionAdded: v1_2_0
        PhysicalContext:
          description: The area or device to which this sensor measurement applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalContext
          - enum:
            - null
          readOnly: true
          x-excerpt: SensorArray,SensorFanArray,SensorPowerArray
          x-longDescription: This property shall contain a description of the affected
            component or region within the equipment to which this sensor measurement
            applies.
        PhysicalSubContext:
          description: The usage or location within a device to which this sensor
            measurement applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalSubContext
          - enum:
            - null
          readOnly: true
          x-excerpt: SensorArray,SensorFanArray,SensorPowerArray
          x-longDescription: This property shall contain a description of the usage
            or sub-region within the equipment to which this sensor measurement applies.  This
            property generally differentiates multiple sensors within the same `PhysicalContext`
            instance.
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
      type: object
      x-excerpt: SensorArray
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorCurrentExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        CrestFactor:
          description: The crest factor for this sensor.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorCurrent,SensorVoltage
          x-longDescription: This property shall contain the ratio of the peak measurement
            divided by the RMS measurement and calculated over same N line cycles.  A
            sine wave would have a value of 1.414.
          x-versionAdded: v1_1_0
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
        THDPercent:
          description: The total harmonic distortion percent (% THD).
          minimum: 0
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorCurrent,SensorVoltage
          x-longDescription: This property shall contain the total harmonic distortion
            of the `Reading` property in percent units, typically `0` to `100`.
          x-units: '%'
          x-versionAdded: v1_1_0
      type: object
      x-excerpt: SensorCurrent
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorEnergykWhExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        ApparentkVAh:
          description: Apparent energy (kVAh).
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorEnergykWh
          x-longDescription: This property shall contain the apparent energy, in kilovolt-ampere-hour
            units, for an electrical energy measurement.  This property can appear
            in sensors with a `ReadingType` containing `EnergykWh`, and shall not
            appear in sensors with other `ReadingType` values.
          x-units: kV.A.h
          x-versionAdded: v1_5_0
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        LifetimeReading:
          description: The total accumulation value for this sensor.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorEnergykWh
          x-longDescription: This property shall contain the total accumulation of
            the `Reading` property over the sensor's lifetime.  This value shall not
            be reset by the `ResetMetrics` action.
          x-versionAdded: v1_1_0
        ReactivekVARh:
          description: Reactive energy (kVARh).
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorEnergykWh
          x-longDescription: This property shall contain the reactive energy, in kilovolt-ampere-hours
            (reactive) units, for an electrical energy measurement.  This property
            can appear in sensors with a `ReadingType` containing `EnergykWh`, and
            shall not appear in sensors with other `ReadingType` values.
          x-units: kV.A.h
          x-versionAdded: v1_5_0
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
        SensorResetTime:
          description: The date and time when the time-based properties were last
            reset.
          format: date-time
          nullable: true
          readOnly: true
          type: string
          x-excerpt: SensorEnergykWh
          x-longDescription: This property shall contain the date and time when the
            `ResetMetrics` action was last performed or when the service last reset
            the time-based property values.
      type: object
      x-excerpt: SensorEnergykWh
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
      type: object
      x-excerpt: Sensor
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorFanArrayExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        DeviceName:
          description: The name of the device.
          nullable: true
          readOnly: true
          type: string
          x-excerpt: SensorArray,SensorFanArray
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain the name of the device associated
            with this sensor.  If the device is represented by a resource, the value
            shall contain the value of the `Name` property of the associated resource.
          x-versionAdded: v1_2_0
        PhysicalContext:
          description: The area or device to which this sensor measurement applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalContext
          - enum:
            - null
          readOnly: true
          x-excerpt: SensorArray,SensorFanArray,SensorPowerArray
          x-longDescription: This property shall contain a description of the affected
            component or region within the equipment to which this sensor measurement
            applies.
        PhysicalSubContext:
          description: The usage or location within a device to which this sensor
            measurement applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalSubContext
          - enum:
            - null
          readOnly: true
          x-excerpt: SensorArray,SensorFanArray,SensorPowerArray
          x-longDescription: This property shall contain a description of the usage
            or sub-region within the equipment to which this sensor measurement applies.  This
            property generally differentiates multiple sensors within the same `PhysicalContext`
            instance.
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
        SpeedRPM:
          description: The rotational speed.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorFan,SensorFanArray,SensorPump
          x-longDescription: This property shall contain a reading of the rotational
            speed of the device in revolutions per minute (RPM) units.
          x-units: '{rev}/min'
          x-versionAdded: v1_2_0
      type: object
      x-excerpt: SensorFanArray
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorFanExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
        SpeedRPM:
          description: The rotational speed.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorFan,SensorFanArray,SensorPump
          x-longDescription: This property shall contain a reading of the rotational
            speed of the device in revolutions per minute (RPM) units.
          x-units: '{rev}/min'
          x-versionAdded: v1_2_0
      type: object
      x-excerpt: SensorFan
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorPowerArrayExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        ApparentVA:
          description: The product of voltage and current for an AC circuit, in volt-ampere
            units.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall contain the product of voltage (RMS)
            multiplied by current (RMS) for a circuit.  This property can appear in
            sensors of the `Power` `ReadingType`, and shall not appear in sensors
            of other `ReadingType` values.
          x-units: V.A
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        PhaseAngleDegrees:
          description: The phase angle (degrees) between the current and voltage waveforms.
          maximum: 90
          minimum: -90
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall contain the phase angle, in degree
            units, between the current and voltage waveforms for an electrical measurement.  This
            property can appear in sensors with a `ReadingType` containing `Power`,
            and shall not appear in sensors with other `ReadingType` values.
          x-versionAdded: v1_5_0
        PhysicalContext:
          description: The area or device to which this sensor measurement applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalContext
          - enum:
            - null
          readOnly: true
          x-excerpt: SensorArray,SensorFanArray,SensorPowerArray
          x-longDescription: This property shall contain a description of the affected
            component or region within the equipment to which this sensor measurement
            applies.
        PhysicalSubContext:
          description: The usage or location within a device to which this sensor
            measurement applies.
          oneOf:
          - $ref: http://redfish.dmtf.org/schemas/v1/PhysicalContext.yaml#/components/schemas/PhysicalContext_PhysicalSubContext
          - enum:
            - null
          readOnly: true
          x-excerpt: SensorArray,SensorFanArray,SensorPowerArray
          x-longDescription: This property shall contain a description of the usage
            or sub-region within the equipment to which this sensor measurement applies.  This
            property generally differentiates multiple sensors within the same `PhysicalContext`
            instance.
        PowerFactor:
          description: The power factor for this sensor.
          maximum: 1
          minimum: -1
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall identify the quotient of real power
            (W) and apparent power (VA) for a circuit.  `PowerFactor` is expressed
            in unit-less 1/100ths.  This property can appear in sensors containing
            a `ReadingType` value of `Power`, and shall not appear in sensors of other
            `ReadingType` values.
        ReactiveVAR:
          description: The square root of the difference term of squared apparent
            VA and squared power (Reading) for a circuit, in VAR units.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall contain the arithmetic mean of product
            terms of instantaneous voltage and quadrature current measurements calculated
            over an integer number of line cycles for a circuit.  This property can
            appear in sensors of the `Power` `ReadingType`, and shall not appear in
            sensors of other `ReadingType` values.
          x-units: V.A
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
      type: object
      x-excerpt: SensorPowerArray
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorPowerExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        ApparentVA:
          description: The product of voltage and current for an AC circuit, in volt-ampere
            units.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall contain the product of voltage (RMS)
            multiplied by current (RMS) for a circuit.  This property can appear in
            sensors of the `Power` `ReadingType`, and shall not appear in sensors
            of other `ReadingType` values.
          x-units: V.A
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        PhaseAngleDegrees:
          description: The phase angle (degrees) between the current and voltage waveforms.
          maximum: 90
          minimum: -90
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall contain the phase angle, in degree
            units, between the current and voltage waveforms for an electrical measurement.  This
            property can appear in sensors with a `ReadingType` containing `Power`,
            and shall not appear in sensors with other `ReadingType` values.
          x-versionAdded: v1_5_0
        PowerFactor:
          description: The power factor for this sensor.
          maximum: 1
          minimum: -1
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall identify the quotient of real power
            (W) and apparent power (VA) for a circuit.  `PowerFactor` is expressed
            in unit-less 1/100ths.  This property can appear in sensors containing
            a `ReadingType` value of `Power`, and shall not appear in sensors of other
            `ReadingType` values.
        ReactiveVAR:
          description: The square root of the difference term of squared apparent
            VA and squared power (Reading) for a circuit, in VAR units.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorPower,SensorPowerArray
          x-longDescription: This property shall contain the arithmetic mean of product
            terms of instantaneous voltage and quadrature current measurements calculated
            over an integer number of line cycles for a circuit.  This property can
            appear in sensors of the `Power` `ReadingType`, and shall not appear in
            sensors of other `ReadingType` values.
          x-units: V.A
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
      type: object
      x-excerpt: SensorPower
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorPumpExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
        SpeedRPM:
          description: The rotational speed.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorFan,SensorFanArray,SensorPump
          x-longDescription: This property shall contain a reading of the rotational
            speed of the device in revolutions per minute (RPM) units.
          x-units: '{rev}/min'
          x-versionAdded: v1_2_0
      type: object
      x-excerpt: SensorPump
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_SensorVoltageExcerpt:
      additionalProperties: false
      description: The `Sensor` schema describes a sensor and its properties.
      properties:
        CrestFactor:
          description: The crest factor for this sensor.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorCurrent,SensorVoltage
          x-longDescription: This property shall contain the ratio of the peak measurement
            divided by the RMS measurement and calculated over same N line cycles.  A
            sine wave would have a value of 1.414.
          x-versionAdded: v1_1_0
        DataSourceUri:
          description: The link to the resource that provides the data for this sensor.
          format: uri-reference
          nullable: true
          readOnly: true
          type: string
          x-excerptCopyOnly: true
          x-longDescription: This property shall contain a URI to the resource that
            provides the source of the excerpt contained within this copy.
        Reading:
          description: The sensor value.
          nullable: true
          readOnly: true
          type: number
          x-excerpt: Sensor
          x-longDescription: This property shall contain the sensor value.  This property
            shall not be returned if the `Enabled` property is supported and contains
            `false`.
        THDPercent:
          description: The total harmonic distortion percent (% THD).
          minimum: 0
          nullable: true
          readOnly: true
          type: number
          x-excerpt: SensorCurrent,SensorVoltage
          x-longDescription: This property shall contain the total harmonic distortion
            of the `Reading` property in percent units, typically `0` to `100`.
          x-units: '%'
          x-versionAdded: v1_1_0
      type: object
      x-excerpt: SensorVoltage
      x-longDescription: This resource shall represent a sensor for a Redfish implementation.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_Threshold:
      additionalProperties: false
      description: The threshold definition for a sensor.
      properties:
        Activation:
          description: The direction of crossing that activates this threshold.
          oneOf:
          - $ref: '#/components/schemas/Sensor_v1_9_1_ThresholdActivation'
          - enum:
            - null
          readOnly: false
          x-longDescription: This property shall indicate the direction of crossing
            of the reading for this sensor that activates the threshold.
        DwellTime:
          description: The duration the sensor value must violate the threshold before
            the threshold is activated.
          nullable: true
          pattern: ^P(\d+D)?(T(\d+H)?(\d+M)?(\d+(.\d+)?S)?)?$
          readOnly: false
          type: string
          x-longDescription: This property shall indicate the duration the sensor
            value violates the threshold before the threshold is activated.
        HysteresisDuration:
          description: The duration the sensor value must not violate the threshold
            before the threshold is deactivated.
          nullable: true
          pattern: ^P(\d+D)?(T(\d+H)?(\d+M)?(\d+(.\d+)?S)?)?$
          readOnly: false
          type: string
          x-longDescription: This property shall indicate the duration the sensor
            value no longer violates the threshold before the threshold is deactivated.  A
            duration of zero seconds, or if the property is not present in the resource,
            shall indicate the threshold is deactivated immediately once the sensor
            value no longer violates the threshold.  The threshold shall not deactivate
            until the conditions of both `HysteresisReading` and `HysteresisDuration`
            are met.
          x-versionAdded: v1_7_0
        HysteresisReading:
          description: The reading offset from the threshold value required to clear
            the threshold.
          nullable: true
          readOnly: false
          type: number
          x-longDescription: This property shall indicate the offset from the reading
            for this sensor and the threshold value that deactivates the threshold.  For
            example, a value of `-2` indicates the sensor reading shall fall 2 units
            below an upper threshold value to deactivate the threshold.  The value
            of the property shall use the same units as the `Reading` property.  A
            value of `0`, or if the property is not present in the resource, shall
            indicate the threshold is deactivated when the sensor value no longer
            violates the threshold.  The threshold shall not deactivate until the
            conditions of both `HysteresisReading` and `HysteresisDuration` are met.
          x-versionAdded: v1_7_0
        Reading:
          description: The threshold value.
          nullable: true
          readOnly: false
          type: number
          x-longDescription: This property shall indicate the reading for this sensor
            that activates the threshold.  The value of the property shall use the
            same units as the `Reading` property.
      type: object
      x-longDescription: This type shall contain the properties for an individual
        threshold for this sensor.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
    Sensor_v1_9_1_ThresholdActivation:
      enum:
      - Increasing
      - Decreasing
      - Either
      - Disabled
      type: string
      x-enumDescriptions:
        Decreasing: Value decreases below the threshold.
        Disabled: The threshold is disabled.
        Either: Value crosses the threshold in either direction.
        Increasing: Value increases above the threshold.
      x-enumLongDescriptions:
        Decreasing: This threshold is activated when the reading changes from a value
          higher than the threshold to a value lower than the threshold.
        Disabled: This value shall indicate the threshold is disabled and no actions
          shall be taken as a result of the reading crossing the threshold value.
        Either: This threshold is activated when either the increasing or decreasing
          conditions are met.
        Increasing: This threshold is activated when the reading changes from a value
          lower than the threshold to a value higher than the threshold.
      x-enumVersionAdded:
        Disabled: v1_7_0
    Sensor_v1_9_1_Thresholds:
      additionalProperties: false
      description: The set of thresholds defined for a sensor.
      properties:
        LowerCaution:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: The value at which the reading is below normal range.
          x-longDescription: This property shall contain the value at which the `Reading`
            property is below normal range.  The value of the property shall use the
            same units as the `Reading` property.
        LowerCautionUser:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: A user-defined value at which the reading is considered below
            normal range.
          x-longDescription: This property shall contain a user-defined value at which
            the `Reading` property is considered below the normal range.  The value
            of the property shall use the same units as the `Reading` property.  The
            `Reading` property shall be considered below normal range if either the
            `LowerCaution` or `LowerCautionUser` threshold has been violated.  This
            property is used to provide an additional, user-defined threshold value
            when the `LowerCaution` threshold is implemented as read-only to reflect
            a service-defined value that cannot be changed.
          x-versionAdded: v1_2_0
        LowerCritical:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: The value at which the reading is below normal range but not
            yet fatal.
          x-longDescription: This property shall contain the value at which the `Reading`
            property is below the normal range but is not yet fatal.  The value of
            the property shall use the same units as the `Reading` property.
        LowerCriticalUser:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: A user-defined value at which the reading is considered below
            normal range but not yet fatal.
          x-longDescription: This property shall contain a user-defined value at which
            the `Reading` property is considered below the normal range but is not
            yet fatal.  The value of the property shall use the same units as the
            `Reading` property.  The `Reading` property shall be considered below
            normal range if either the `LowerCritical` or `LowerCriticalUser` threshold
            has been violated.  This property is used to provide an additional, user-defined
            threshold value when the `LowerCritical` threshold is implemented as read-only
            to reflect a service-defined value that cannot be changed.
          x-versionAdded: v1_2_0
        LowerFatal:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: The value at which the reading is below normal range and fatal.
          x-longDescription: This property shall contain the value at which the `Reading`
            property is below the normal range and is fatal.  The value of the property
            shall use the same units as the `Reading` property.
        UpperCaution:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: The value at which the reading is above normal range.
          x-longDescription: This property shall contain the value at which the `Reading`
            property is above the normal range.  The value of the property shall use
            the same units as the `Reading` property.
        UpperCautionUser:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: A user-defined value at which the reading is considered above
            normal range.
          x-longDescription: This property shall contain a user-defined value at which
            the `Reading` property is considered above the normal range.  The value
            of the property shall use the same units as the `Reading` property.  The
            `Reading` property shall be considered above normal range if either the
            `UpperCaution` or `UpperCautionUser` threshold has been violated.  This
            property is used to provide an additional, user-defined threshold value
            when the `UpperCaution` threshold is implemented as read-only to reflect
            a service-defined value that cannot be changed.
          x-versionAdded: v1_2_0
        UpperCritical:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: The value at which the reading is above normal range but not
            yet fatal.
          x-longDescription: This property shall contain the value at which the `Reading`
            property is above the normal range but is not yet fatal.  The value of
            the property shall use the same units as the `Reading` property.
        UpperCriticalUser:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: A user-defined value at which the reading is considered above
            normal range but not yet fatal.
          x-longDescription: This property shall contain a user-defined value at which
            the `Reading` property is considered above the normal range but is not
            yet fatal.  The value of the property shall use the same units as the
            `Reading` property.  The `Reading` property shall be considered above
            normal range if either the `UpperCritical` or `UpperCriticalUser` threshold
            has been violated.  This property is used to provide an additional, user-defined
            threshold value when the `UpperCritical` threshold is implemented as read-only
            to reflect a service-defined value that cannot be changed.
          x-versionAdded: v1_2_0
        UpperFatal:
          $ref: '#/components/schemas/Sensor_v1_9_1_Threshold'
          description: The value at which the reading is above normal range and fatal.
          x-longDescription: This property shall contain the value at which the `Reading`
            property is above the normal range and is fatal.  The value of the property
            shall use the same units as the `Reading` property.
      type: object
      x-longDescription: This object shall contain the set of thresholds that derive
        a sensor's health and operational range.
      x-patternProperties:
        ^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\.[a-zA-Z_][a-zA-Z0-9_]*$:
          description: This property shall specify a valid odata or Redfish property.
title: '#Sensor.v1_9_1.Sensor'
x-copyright: Copyright 2014-2024 DMTF. For the full DMTF copyright policy, see http://www.dmtf.org/about/policies/copyright
x-language: en
x-owningEntity: DMTF
x-release: '2024.1'
